Foaming Mould Laser Cleaning System Portable 300W Laser Cleaning Machine For Die Molds
Technical parameters
| Electrical characteristics |
| No. | Characteristic | Test Conditions | Min | Typical value | Max | Unit |
| 1 | Supply voltage | 220 | 210 | 220 | 230 | AC |
| 2 | Maximum current loss | Pout=Pnom | 4 | 5 | 6 | A |
| 3 | Total power consumption | 1440 | 1430 | 1440 | 1450 | W |
| 4 | Fiber optic cable | 5 | 5 | 5 | 8 | M |
| General characteristics |
| L/N | Characteristics | Parameters | Unit |
| 1 | Output Fiber cable | 5 | M |
| 2 | Average power output | 350±5 | W |
| 3 | Power adjust range | 1-100 | % |
| 4 | Max. Pulse energy | 15 | MJ |
| 5 | Pulse width | 80-500 | NS |
| 6 | Cooling method | Air-cooling | |
| 7 | Laser level | Level 4 | |
| 8 | Max. power consumption | 1440 | W |
| 9 | Center wavelength | 1064 | NM |
| 10 | Voltage | 220 | AC |
| 11 | Work temperature | 0-60 | ℃ |
| 12 | Lasser source dimension | 558*378.5*425 | MM |
| 13 | Machine dimension | 850*500*950 | MM |
| 14 | Machine weight | 133 | KG |
Advantages of laser cleaning the moldings
Compared with traditional cleaning methods such as Chemical mold cleaning liquid or sandblasting, laser cleaning has huge advantages:
1) Only use electricity, without any other consumables, energy-saving, and cost-saving.
2) Low noise, no chemical pollution, environmental protection, avoid environmental troubles;
3) Laser non-contact cleaning, no damage to the mold base material, knife edges, ridges, and prolongs the life of the molds;
4) Retain the electroplated layer, no damage to the product finish;
5) Efficient and thorough cleaning to improve productivity and product quality;
6) Automatic cleaning, labor cost saving;
7) No temperature effects, both cold and hot molds can be cleaned;
8) Flexible cleaning methods, hand-held cleaning, automatic cleaning optional;
9) No cleaning dead end, no shape limitation, where the laser can reach can be cleaned
Technical Advantages:
Clean or remove the surface paint layer with high efficiency.
Accurate cleaning and rust removal effects;
No damage to the substrate;
Low cost, low consumption;
Fast investment recovery;
No need to sand grit or chemical;
Easy operation
Product Application:
Applications of laser cleaning machine
Laser cleaning machine is widely used for the surface laser degreasing, laser paint removal, laser removal of zinc, laser film removal, laser cleaning, welding bead cleaning, coating cleaning and etc.
Machine brief introduction
The laser cleaning Machine is a new generation of industrial surface cleaning laser system. It adopts the advanced laser source, laser optical scanners and control system to meet the requirements of metal surface cleaning process.
Laser dry cleaning method of laser cleaning machine
Use pulses laser to clean rust directly, it will generate vibration after the laser energy is absorbed by the base or particles, then seperate the base and comtaminant.
Machine Features
1. Clean or remove the surface paint layer quickly and cleanly;
2. Accurate cleaning and paint removal effects;
3. no damage to the substrate;
4. low cost;
5. Fast investment recovery;
6. No need to sand grit or chemical;
7. The equipment does not need to be set up;
8. Low noise;
9. There are no maintenance requirements.
Product Tags:
|
|
300W Portable Laser Cleaning Machine For Foaming Mould Images
|
